GLite PRO large 3600 series has been developed as a step between our most advanced series; gHost and our lowest modules; Longlife. Glite PRO gives you the ability to have control over your device via SMS and its miniature size and Knowles microphone are making it one of the most competitve devices available on the market.
GLite PRO large 3600 is a unique GSM listening device that is equipped with a variety of functions, it can serve as a protective device as well as a devices for gathering information. The main benefits of this device are clear sound, long battery life and functionality.
We have tried to maintain small proportions but not at the cost of the sound quality, with the combination of Knowles microphones and latest chip-set we believe that this is the highest sound quality we are able to transfer via a GSM network.
*Special note: There is a possibility of customizing GLite PRO chip-set to other batteries and functions, if you have larger order we would be happy to discuss the options.
There is a limit to the sound quality transferred over GSM, one of those limits is rooted in the dependency on the GSM networks (such as signal strength). This is a mono GSM device and so we have selected the microphone with the best SNR (signal to noise ratio) in order to maximize the quality at low consumption. We have achieved this by selecting HQ Knowles microphones.
On the table below you can see the performance of each model, please note that "+" = long microphone version" has got extended Knowles for the convenience of usage.
|Standby days||Callback days||In call hours||Microphone|
|GLite PRO 750||7.8||4.5||5.0||short|
|GLite PRO 750+||7.8||4.5||5.0||long|
|GLite PRO 1200||12.5||7.1||8.0||short|
|GLite PRO 1200+||12.5||7.1||8.0||long|
|GLite PRO large 3600||37.5||21.0||24.0||short|
|GLite PRO large 3600+||37.5||21.0||24.0||long|
*Maximum values tested
The GLite 3600 PRO series uses a very simple communication command set, which is easy to master within a matter of minutes. You can also use in-call commands in order to change the settings of the microphone etc. We advise you to read the manual carefully, in order to grasp the full functionality of GLite PRO series devices. Light sensor and in-call commands can come in very handy when used properly.
|Note: On the graph you can see the maximum Hours of operation and Standby in days of GLite PRO 3600. The graph should help you see how much shorter standby is in case you have called the device. For example, if you have called the device for 5 hours already, you will only have 25 days of standby.|
|Daily minutes usage (each day)||5 min/day||15 min/day||30 min/day||60 min/day||120 min/day|
|Days remaing||33 days||27 days||21 days||15 days||9 days|
Note: The table shows daily consumption, for example, if you would call the unit 30 minutes per day, you could do this for 21 consecutive days.