UltraLife camera in junction box
SECU22-N
UltraLife camera in Junction box has the ability to stay in PIR detection mode for 54 days. It has 2K UHD resolution and is designed for outside usage. Its angle goes up to 60 degrees, that gives you a wide field of view for such a small disguised minicamera.
UltraLife camera in Junction box is another great adition to the UltraLife monitoring series. As you can see from the series, many of the cameras are for indoor usage. We have had several requests for an outdoor small surveillance camera. This box is intended to look like an ordinary object on your house or in your backyard.
Thanks to the size of the box the small hidden camera is becoming virtually invisible. You will not need any cables or anything, you simply attach the box to the wall outside or inside and you use the remote to control it. The Ultralife Junction box has the possibility of battery switching, which means that you order an extra battery with a BEC charger.
Function of UltraLife camera in Junction box
-
Extremely long-lasting batteryUltraLife PIR Sensor Camera is equipped with a PIR sensor which has consumption only of 7mAh, that is used in combination with a battery of 11000mAh Li-Pol this provides you with battery life up to 30 days.
-
Fast activation time
The motion detection with PIR in this module is extremely fast, as the detection will occur in a matter of seconds. -
2K video quality (2304x1296px@30FPS)
The chip is CMOS with chip the view angle is 60 degrees. -
Memory
Memory capacity is 128 GB which will last for about 80 hours of recording. There is a function for automatic footage overwrite, meaning you will not have to worry about taking out the card. You can also swap the SD cards at your convenience, and please make sure that the device is powered off. -
220V Connectivity
Device itself can be connected to a 220V outlet and run from a electricity grid.
Other functions:
- records in 2K UHD resolution
- 54 days in the PIR detection mode
- 40 hours of continuous recording
- Easy installation
- 3 modes of recording: PIR detection / movement detection / manual recording
- Remote control
- Video out for control of the monitored area
- Battery 11000 mAh
- 220V Connectivity
Consumption in different recording modes
| Battery capacity | 11 000 mAh |
| Consumption in PIR mode | 7mA |
| Consumption when recording | 200 - 250mA |
Package contains:
- UltraLife camera in Junction box
- Remote control
- Video cabel
- Charger
- 11 000mAh battery
SECU22-N
Data sheet
- Connection
- Memory card
- Resolution
- 2K UHD
- Battery life standby
- 60+ days
- Recording type
- Continuous recording
Movement detection
Specific References
| Parameters | Description |
| Special features | PIR sensor, Camouflage in object, Video + Audio, Time stamp |
| Effective Pixels | 2K resolution (2304x1296px) |
| Battery life | 20 - 54 days |
| Recording Video Format | .avi |
| Minimum illumination | 1.0 Lux |
| Lens | pinhole |
| Viewing angle | 60° |
| Recording Speed | 30 FPS |
| Time stamp | Yes |
| File Overwrite | Yes |
| Recording audio only | No |
| Battery capacity | 11000 mAh |
| Charging time | approx. 18h |
| Power consumption | Max 300mA 5V |
| Maximum recording time | 40 hours |
| Non-stop operation in electricity | Yes |
| Operating temperature | -10 ~ 50 °C (+14 ~ 122 °F) |
| PIR activation delay | 7 seconds |
| Taking photos | Yes |
| Consumption in PIR | 7mAh |
| Maximum Capacity | 128 GB |
| Dimensions | 110 x 110 x 58 mm |
9 same category products :
UltraLife camera in Junction box has the ability to stay in PIR detection mode for 54 days. It has 2K UHD resolution and is designed for outside usage. Its angle goes up to 60 degrees, that gives you a wide field of view for such a small disguised minicamera.
