UltraLife Smoke Wi-Fi camera with long standby time

This is a Wi-Fi extension of our already popular Stealthtronic UltraLife series, which focuses on the highest possible standby time on a single battery charge. You will have the ability to view the picture online on your smartphone.

The device is designed for use in offices or indoor spaces, as it does not have IP68 waterproof protection. Nonetheless, it will work outdoors if it is protected from water exposure. It's a virtually invisible pinhole camera and any other PIR motion sensor.

Stronic UltraLife hidden camera in PIR is easy to install and mount onto a wall. The whole set-up will take less than 5 minutes of your time, and you can start viewing the recordings. The sensor will activate at a distance of up to 7 meters.

Where can we use UltraLife Smoke Wi-Fi camera ?

• hidden monitoring of your commercial space
• thief identification if you are losing stock, even though you have cameras installed, there are always blind spots

Function of UltraLife Smoke Wi-Fi PIR

• The extremely long-lasting battery in this module is equipped with a PIR sensor, which consumes only 1-2mAh, and is used in combination with a battery of 5500mAh Li-Pol.
• Live Wi-Fi view
  An integrated Wi-Fi module in the device itself will give you the possibility to see the online recordings at all times. Be cautious, as the device consumes energy while recordings are being watched.
• Fast activation time
  The motion detection with PIR in this module is swift, as the detection will occur in seconds.
• Mobile phone controls
  The application has a support of 4 cameras at the same time, meaning you can control up to 4 of them in the application. You can view videos as well as pictures.
• Full HD Quality
  The chip is CMOS with 3.69 MPix, the view angle is 70 degrees, and it records audio and video.
• Memory
  Memory capacity is 32GB, which will last for about 80 hours of usage. There is a function for automatic footage overwrite, meaning you will not have to worry about taking out the card. You can also swap the SD cards at your convenience. Please ensure the device is powered off.

Additional information

1st time usage, please make sure the device has at least 6 hours of charge. Before dispatch from our company, we always charge the battery, but we still recommend charging it a full first-time charge.

Camera activation

The activation will happen within 1-2 seconds since the movement sensor was activated. You can turn on push notifications on your phone and immediately get an alert for movement. Once the movement is no longer present, the camera will rest in a standby PIR silent mode. You can connect to the camera at any time and see the surroundings at your convenience, thanks to the low power consumption of the Wi-Fi module.

Package contains:

• UltraLife Smoke sensor PIR camera
• 3M tape for easy placement
• DC 5V adaptor