UltraLife WiFi Camera In Junction Box long battery life

This is an Wi-Fi extension of our already popular Stealthtronic UltraLife series, which focuses on highest possible standby time on a single battery charge. You will have the ability to view the picture online, on your smartphone.

UltraLife WiFi Camera In Junction Box is a hidden camera suitable for installation on the wall of the house, use in warehouses or corridors thanks to the perfect camouflage of an installation box. The installation is very easy without the need for cabling. All configuration is done via the mobile app. The complete configuration, including installation, can thus be completed within 5 minutes.

This camera allows you to monitor selected areas for a very long time, up to 180 days without charging. Recordings can be stored on a microSD card up to 32 GB. A motion detector up to 10m will alert you to the mobile app of any intruders on the premises. At the same time, it starts recording in full HD quality, including an audio track. Once the motion stops the camera switches to power saving mode. You can connect to the camera remotely anytime and anywhere thanks to the integrated Wi-Fi module. It also requires you to have a reliable Wi-Fi network set-up. 

Where can we use UltraLife Smoke Wi-Fi camera ?

• hidden monitoring of your commercial space
• outside on lamp posts or buildings to monitor a construction site
• thief identification if you are losing stock, even though you have cameras installed, there are always blind spots

Key features:

• Extremely long-lasting battery in this module is equipped with a PIR sensor which has consumption only of 1-2mAh, that is used in combination with a battery of 5500mAh Li-Pol
• Live Wi-Fi view
  Integrated Wi-Fi module in the device itself, will give you the possibility to see the online recordings at all times, be cautioned, as the device consumes energy while recordings are being watched.
• Fast activation time
  The motion detection with PIR in this module is extremely fast, as the detection will occur in matters of seconds.
• Mobile phone controls
  The application has a support of 4 cameras at the same time, meaning you can control up to 4 of them in the application. You can view videos as well as pictures.
• Full HD Quality
  The chip is CMOS with 2.0 Mpix , the view angle is 70 degrees and it records audio as well as video.
• Memory
  Memory capacity is 32GB which will last for about 80 hours of usage. There is a function for automatic footage overwrite, which means that you will not have to worry about taking out the card. You can also swap the SD cards at your convenience, please make sure that the device is powered off.

Additional information

1st time usage, please make sure the device has got at least 6 hours of charge. Before dispatch from our comapny, we always charge the battery, but we still recommend giving it a first time full charge.

Camera activation

The activation will happen within 1-2 seconds, since the movement sensor was activated. You can turn on push notification on your phone and you will immediately get an alert for movement. Once the movement is no longer present, the camera will put itself in a standby PIR silent mode again. You can connect at any instance to the camera and see the surroundings at your convenience, thanks to the low power consumption of Wi-Fi module.

Package contains:

• The UltraLife WiFi Camera in Junction Box installation box
• 3M tape for easy placement
• DC 5V adaptor