UltraLife Smoke Wi-Fi camera with long stand-by time
This is an Wi-Fi extension of our already popular Stealthtronic UltraLife series, which focuses on highest possible standby time on a single battery charge. You will have the ability to view the picture online, on your smartphone.
Device is designed to be used in offices or indoor spaces, as it does not have IP68 waterproof protection. Nonetheless, it will work in outdoor environment as long there is a protection from water exposure. Its virtually invisible pinhole camera any other PIR motion sensor.
Stronic UltraLife hidden camera in PIR is easy to install and mount onto a wall, the whole set-up will take less than 5 minutes of your time and you can start viewing the recordings. The sensor will activate on a distance up to 7 meters.

Where can we use UltraLife Smoke Wi-Fi camera ?
- hidden monitoring of your commercial space
- thief identification if you are losing stock, even though you have cameras installed, there are always blind spots
Function of UltraLife Smoke Wi-Fi PIR
-
Extremely long-lasting battery in this module is equipped with a PIR sensor which has consumption only of 1-2mAh, that is used in combination with a battery of 5500mAh Li-Pol
-
Live Wi-Fi view
Integrated Wi-Fi module in the device itself, will give you the possibility to see the online recordings at all times, be cautioned, as the device consumes energy while recordings are being watched.
-
Fast activation time
The motion detection with PIR in this module is extremely fast, as the detection will occur in matters of seconds.
-
Mobile phone controls
The application has a support of 4 cameras at the same time, meaning you can control up to 4 of them in the application. You can view videos as well as pictures.
-
Full HD Quality
The chip is CMOS with 2.0 Mpix , the view angle is 70 degrees and it records audio as well as video.
-
Memory
Memory capacity is 32GB which will last for about 80 hours of usage. There is a function for automatic footage overwrite, which means that you will not have to worry about taking out the card. You can also swap the SD cards at your convenience, please make sure that the device is powered off.
Additional information
1st time usage, please make sure the device has got at least 6 hours of charge. Before dispatch from our comapny, we always charge the battery, but we still recommend giving it a first time full charge.
Camera activation
The activation will happen within 1-2 seconds, since the movement sensor was activated. You can turn on push notification on your phone and you will immediately get an alert for movement. Once the movement is no longer present, the camera will put itself in a standby PIR silent mode again. You can connect at any instance to the camera and see the surroundings at your convenience, thanks to the low power consumption of Wi-Fi module.
Package contains:
- UltraLife Smoke sensor PIR camera
- 3M tape for easy placement
- DC 5V adaptor